A4 paper size
A4 is the default sheet for most of the world and the one most home printers are already loaded with. At 210 × 297 mm it takes a portrait study or a pattern piece comfortably.
| Millimetres | 210 × 297 mm |
|---|---|
| Centimetres | 21 × 29.7 cm |
| Inches | 8.27 × 11.69 in |
| Aspect ratio | 1:1.41 |
| Pixels at 300 DPI | 2480 × 3508 px |
| Series | ISO 216 A series |
How A4 compares
- Two A4 sheets side by side make one A3; A4 is A3 folded in half.
- Fold A4 in half across its long side and you get A5, the same shape at half the area.
- Its area is 0.0624 m² — A0 is defined as 1 m², and each step down halves it.
- The closest US sheet is US Letter (215.9 × 279.4 mm): A4 is 5.9 mm narrower and 17.6 mm taller, so a layout made for one will not drop onto the other without rescaling.
What A4 is used for
- Everyday printing
- Portrait studies
- Pattern pieces and templates
- Printable stencils
Why A4 is the usual choice
Every ISO A size is the same shape — halve the long side and you get the next size down — so a drawing measured for A4 can be reprinted at A3 or A5 without recomposing it. Only the numbers change. That is not true of the US sizes, which is worth knowing before committing a stencil to Letter.
The closest alternative
US Letter is 215.9 × 279.4 mm: fractionally wider than A4 and noticeably shorter. A layout that just fits A4 will usually lose something off the bottom on Letter, so pick one at the start rather than converting later.
Margins
Most printers cannot reach the edge of the sheet. Keep critical marks 5–10 mm inside the trim, or print borderless if your printer supports it.
Questions
- What size is A4 in millimetres and inches?
- A4 measures 210 × 297 mm, which is 8.27 × 11.69 inches. MeasureOver uses these exact dimensions when it converts guide-line intersections into real measurements.
- What pixel size is A4 at 300 DPI?
- 2480 × 3508 pixels. That is the resolution MeasureOver exports at for A4, which is the normal standard for printed line work.
- How do I scale a photo to A4?
- Open the photo in MeasureOver, choose A4 as the paper size, and place guide lines over the features you want to locate. Each intersection is reported as a measurement on the A4 sheet, so you can mark the same points on paper or print the overlay directly.